flat‑base scaffolding tag kit
BD-P38
The BD‑P38 flat‑base scaffolding tag kit includes 1 slim long flat‑base ABS holder and 1 narrow 196×81mm double‑sided PVC scaffold insert tag. Finger‑lift tab for quick tag replacement. Dual mounting via cable ties or screws. Pre‑printed “DANGER DO NOT USE INCOMPLETE SCAFFOLD”. Custom printing & bilingual options for tight‑space scaffolding inspection.
- Complete slim flat‑base kit：1pc long‑profile flat‑base ABS scaffold holder + 1pc narrow‑size double‑sided PVC scaffold insert tag, ready‑to‑use out‑of‑box
- Slim elongated housing：specially optimised for narrow scaffolding frame sections where wide‑body tag kits cannot be mounted
- Built‑in finger‑lift tab：fast insert‑tag removal and replacement during periodic audits; no need to dismount holder from scaffold tubes
- Universal round mounting head：compatible with both tube‑clamp scaffolding and modular system scaffolding
- High‑strength ABS holder, optional PP/Nylon on request; reliable performance ‑20 °C ~ +80 °C, weather‑resistant for outdoor construction
- Pre‑printed red hazard warning “DANGER DO NOT USE INCOMPLETE SCAFFOLD”, exposed automatically when insert tag is taken away
- Dual‑point mounting：cable‑tie or screw fastening at top‑bottom pre‑drilled holes for stable anti‑shake installation
- Narrow‑format double‑sided PVC insert (196×81 mm,0.4 mm)：green front for erection‑and‑load records; yellow reverse with legal warning and scaffold‑component checklist
- Hand‑writable PVC surface for on‑site inspection entries; full custom printing & bilingual printing available for holder and insert
- Purpose‑oriented for confined scaffolding locations, simplifies work‑at‑height hazard identification and inspection‑procedure management
Core Parameters
- Model:BD‑P38
- Product Name:Flat‑Base Scaffolding Tag Kit
- Kit Composition:1 × Flat‑Base Slim ABS Scaffold Tag Holder + 1 × Narrow PVC Scaffold Insert Tag
- Material:Holder: ABS (PP/Nylon optional); Insert Card: 0.4 mm PVC
- Holder Dimension:305 mm × 90 mm × 6 mm
- Holder Thickness:7 mm
- Insert Tag Dimension:196 mm × 81 mm
- Holder Pre‑printing:White base with red text: DANGER DO NOT USE INCOMPLETE SCAFFOLD
- Insert Printing:Double‑sided 3‑color printing (green front / yellow back)
- Special Structure:Flat‑base slim long profile, round universal mounting head, finger‑lift tab
- Mounting Method:Cable‑tie fixing or screw fixing (top‑bottom holes)
- Working Temperature:‑20 °C ~ +80 °C
- Writing Tool:Dedicated PVC marker
- Customization:Custom logo, text, graphics, bilingual & multi‑language printing
- Application:Tube‑clamp & modular scaffolding, narrow‑frame‑section inspection, work‑at‑height safety audit
FAQs
1How is BD‑P38 flat‑base kit different from other scaffolding tag kits (BD‑P33 / P35 / P37)?
BD‑P38 features slim long flat‑base housing, focused on **narrow / confined scaffolding frame positions**. BD‑P33 is round‑head general‑purpose kit; BD‑P35 is claw‑type for retro‑fitting on erected pipes; BD‑P37 is wide‑body kit for large open scaffold frames.
2Do I need to remove the whole holder for changing insert tags?
No. Thanks to finger‑lift tab design, you can pull out and replace only the PVC insert tag while the holder stays fixed to scaffolding.
3Which scaffolding systems does BD‑P38 kit fit?
It works for tube‑clamp scaffolding and modular system scaffolding, especially suitable for compact frame sections.
4Can I write inspection records directly on the PVC insert tag?
Yes, use dedicated permanent PVC marker to fill in erection info, inspector signatures, load grades and decommission dates.
5Can both holder and insert tag support custom printing and bilingual text?
Yes, custom logo, graphics, text and multi‑language / bilingual printing can be applied on both components.